Hockey gear still sopping when the program finishes, a drum banging the cabinet on spin, or a lock that simply won't open? A technician heads to the house, isolates the failed component and has the laundry running again.
Front-load, top-load and stacked units in Barrie homes break down along a few familiar lines. Testing begins with the parts printed on each card.
A sock or hair tie caught at the pump inlet, coins packed into the trap, or a pump humming without moving water.
A belt stretched past its limit, a lid lock that never reports closed, or a motor control sending weak signals.
Worn shock absorbers, a broken suspension rod, or a machine sitting off level on the floor.
A jammed lock mechanism, or rinse water still in the drum holding the interlock shut.
A tear in the door boot, a cracked inlet valve, or a clamp that slipped off a pump connection.
Soap residue in the dispenser and boot folds, plus water that never fully empties between loads.
Washer types we fix
Whatever name is on the door, from budget basics to premium European models, our technicians have worked on plenty of them before.
Bosch and Miele washers flag trouble with a letter followed by two digits. Look yours up to see whether it's a quick fix.
Slow or no filling
Open the tap all the way, straighten the inlet line and clean the small filter where it connects at the back.
Try this firstDraining too slowly
Spread a towel, set a shallow tray down, then unscrew the filter behind the little front flap and rinse it.
Try this firstDrain pump fault
The pump motor or its capacitor has stopped working and needs testing.
Call a technicianDoor lock problem
The interlock is not engaging or releasing as it should.
Call a technicianDrainage error
Most often a clogged filter at the pump or a bent drain line. Sort out both, then restart.
Try this firstToo many suds
Too much detergent was added. Run a rinse and use less soap next time.
Try this firstWater not heating
The wash water never reached its target temperature, often because the element failed.
Call a technicianElectronics fault
The control unit reported an internal error, sometimes after a power surge.
Call a technicianCode reappearing after every restart, or missing from these panels? A home visit will pin it down.
(249) 294-4068Laundry rooms from Painswick to the East End, running smoothly again.
Four kids, one washer, and suddenly nothing would drain. A tiny sock was wedged in the pump. Half an hour later we were back in business. Lifesaver.
Our stacked unit shook so badly the shelves rattled. New shocks, feet adjusted, and now it runs quieter than the dishwasher.
Booked in the morning, fixed by lunch. Clear price before he started and no surprises after.
Plenty of washer trouble clears up without a visit. Work through these first.
Power reaching it
If the panel stays blank, reset the breaker and press the plug fully into the outlet.
Taps on
Hot and cold supply valves turned fully on.
Load balanced
Big items such as duvets or rugs washed on their own or spread evenly.
Pump filter cleaned
The cap near the floor removed over a tray and the trap cleared of lint and small items.
Leave these to us
Washer still misbehaving?
Past this point, call in certified and insured technicians.
Fill in your details and mention which machine has stopped cooperating. We call back to arrange an hour that works for your household.
Prefer the phone?
(249) 294-4068Request a Visit
Thank You!
Your message has been sent successfully. We'll get back to you shortly.
Thank You!
Your message has been sent successfully. We'll get back to you shortly.
